Fagor BMF200X 사용자 설명서
18
Temperature inside the
appliance is too cold
appliance is too cold
Increase the temperature by following the “Display Controls” section
(page 11).
(page 11).
Doors won’t close
Check whether the top of the refrigerator is tilted back to allow the doors to
self close, or if something inside is preventing the doors from closing.
self close, or if something inside is preventing the doors from closing.
Water drips from the
appliance
The water pan (located at the rear bottom of the cabinet) may not be properly
leveled. The draining spout located underneath the top of the compressor
depot may not be properly positioned to direct water into this pan, or the
water spout is blocked. You may need to pull the refrigerator away from the
wall to check the pan and spout.
leveled. The draining spout located underneath the top of the compressor
depot may not be properly positioned to direct water into this pan, or the
water spout is blocked. You may need to pull the refrigerator away from the
wall to check the pan and spout.
The light is not working
• The LED light may be damaged. Refer to the “Replacing the LED Light” in
the “Cleaning and Care” section (page 16).
• The control system has disabled the lights due to the door being kept
open too long, close and reopen the door to reactivate the lights. This will
happen when the doors are opened for more than 10 minutes, the alarm
will sound for 1 minute and the light will automatically switch off.
happen when the doors are opened for more than 10 minutes, the alarm
will sound for 1 minute and the light will automatically switch off.