Frigidaire FCGM181RQB 사용자 매뉴얼

The following tools are required to assemble and install the casters to the unit:

1. Remove carton and all loose parts from 

inside the unit.

2. Remove the rear access guard and place 

it and the screws in a safe place for 

reassembly later.

3. Using an assistant, carefully tip the unit 

onto its back and rest on blocks to avoid 

damaging the condensate drain hose 

and the plastic raceway that covers the 

evaporator tubing on the back of the 

cabinet.

4. Remove and discard the two front brackets 

with leg leveler using a 5/16” socket 

wrench. See Figure 1.

5. FOR GLASS DOOR MODELS ONLY - Remove 

bottom door support bracket and screw 

opposite the door hinge using a ⅜” socket 

wrench. See Figure 2.

5/16”, 3/8” and 9/16”  

Socket or Open End Wrench

Adjustable 

Wrench or 

Pliers

Phillips  

Screwdriver

Front

Bracket &

Leg Leveler

Figure 1

Door

support

bracket

Figure 2

In order to reverse door, order service kit from Frigidaire Commercial Service Center  

at 1-866-738-1640.

•  For right hand swing doors, order kit #5304488173.
•  For left hand swing doors, order kit #5304487215.