Monogram ZIPX360NHSS 사양 시트
OVERALL DIMENSIONS
Dimensions in parentheses are in centimeters unless otherwise noted.
Actual product dimensions may vary due to manufacturing tolerances.
Product Specification Created 6/14
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power supply
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
is required. An inidividual properly grounded
branch circuit or circuit breaker is recommended.
Install a properly grounded 3-prong electrical
receptacle recessed into the back wall.
SPECIFICATIONS
Overall Width
38" (96.5 cm)
Overall Height
83 1/2" (212.1 cm)
Overall Depth
25 7/8" (65.7 cm)
Door Clearance
18 11/16" (47.5 cm)
Cutout Width
39" (99.1 cm)
Cutout Height
84 1/2" (214.6 cm)
Cutout Depth
26 3/16" (66.5 cm)
Electrical Requirements
115 V AC, 60 Hz
20 amp circuit
20 amp circuit
Plumbing Requirements
1/4" OD copper
tubing or GE
SmartConnect kit
tubing or GE
SmartConnect kit
Shipping Weight
663 lb (300.7 kg)
ZIP360NH
GE Monogram
®
36" Built-In French-door Bottom-freezer
38"
(96.5)
9 5/8"
(24.4)
1/2"
(1.3)
22 3/8"
(56.8)
25 7/8"
(65.7)
* 83 1/2"
(212.1)
*73 5/16"
(186.2)
*3 1/2"
(7.6)
SIDE VIEW
FRONT VIEW
* 83 1/2"
(
212.1)
35"
(89.0)
Case width
ZIP360NH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow
4"
(10.2) min
clearance to a wall
for 90˚ door swing
for 90˚ door swing
** Allow
4"
(10.2) min
clearance to a wall
for 90˚ door swing
for 90˚ door swing
** These refrigerators are equipped with a 2-position door stop. The factory-set 115° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
**9 3/8"
(23.8)
18 11/16"
(47.5)
TOP VIEW
*115° Door swing
Doors can be adjusted to
90° door swing
**9 3/8"
(23.8)
*26 3/16"
(66.5)
11/16"
(.7)
FLUSH INSET INSTALLATION