Sub-Zero 700TCILH 정보 가이드
7017797
Integrated Column Star-K Kit
7017798 / Rev A / May, 2010
Page 2 of 3
TESTING HARNESS CONNECTIONS:
1.
Supply power to the unit and test the fan and light switches for proper operation; lights ON/fan OFF with
switches open, lights OFF/fan ON with switches closed.
switches open, lights OFF/fan ON with switches closed.
2.
Initiate Sabbath Mode:
A. Press the UNIT ON/OFF key to switch the unit OFF (See Figure 3).
B. Press and hold the UNIT ON/OFF key for ten (10) seconds. The lights should initially switch ON until the
B. Press and hold the UNIT ON/OFF key for ten (10) seconds. The lights should initially switch ON until the
ten (10) seconds has passed, then the lights should switch OFF and the LCD should go blank (See
Figure 4). This indicates the unit is now in Sabbath Mode.
Figure 4). This indicates the unit is now in Sabbath Mode.
UNIT
ICE
REFRIGERATOR
ON/OFF
ON/OFF
ON/OFF
WARMER
COLDER
FREEZER
WARMER
COLDER
Figure 4. Then Press and Hold UNIT ON/OFF Key for ten (10) Seconds
UNIT
ICE
REFRIGERATOR
ON/OFF
ON/OFF
ON/OFF
WARMER
COLDER
FREEZER
OFF
WARMER
COLDER
Press and hold for 10 seconds
Figure 3. To Enter Sabbath Mode, Switch Unit OFF First
3.
Wait for upper section compressor to switch ON, at which time the upper evaporator fan should also switch
ON. Press the fan and light switches at this time and they should be disabled, with the fan continuing to run
and the lights staying OFF regardless of the corresponding switch position.
ON. Press the fan and light switches at this time and they should be disabled, with the fan continuing to run
and the lights staying OFF regardless of the corresponding switch position.
4.
If all tests are OK, re-install the top switch box, making sure that all wires and relay are inside the box, and
re-install the lower switch box, evaporator cover and drawers.
re-install the lower switch box, evaporator cover and drawers.
5.
Place wiring diagram addendum (next page) in wire diagram envelope in compressor unit area.