Miele G4760SCVI 사용자 매뉴얼

Before using for the first time

Rinse aid indicator
When the Rinse Aid indicator lights up,

the rinse aid reservoir contains suffi‐

cient rinse aid for 2 - 3 programs only.
 Add rinse aid.

If you only ever use combination prod‐

ucts in your dishwasher, you can

switch both refill indicators for salt

and rinse aid off if you wish (see "Op‐

tions - Refill indicators").

Setting the rinse aid dosage
You can adjust the rinse aid dosage for

best results.
The rinse aid dosage is set in stages

from 0 to 6. It is set to 3 at the factory.

This is the recommended setting.
The dosage can turn out to be higher

than the set value due to the automatic

adjustment of the Automatic program.
If spots appear on dishware and glass‐

ware:
 Increase the rinse aid dosage.
If clouding or smearing appears on

dishware and glassware:
 Decrease the rinse aid dosage.

 Turn the dishwasher off with the 

button, if it is turned on.

 Press the program selection button



, and, simultaneously switch the

dishwasher on using the  button.

Keep the program selection button 

pressed in for at least four seconds

until the lower right program indicator

light comes on.

If this does not happen, start the proce‐

dure from the beginning again.
 Press the Short button three times.
The Short indicator will flash 3 times at

short intervals.
The set value will appear in the display

after .
The flashing sequence   will appear in

the display.

This indicates a factory default setting

of 3.
 Use the program selection button 

to select the setting required.

Each press of the button moves you

up a level.

The setting is now stored in memory.
 Turn the dishwasher off with the 

button.