Danby DUFM043A1WDD 사용자 매뉴얼

1) THERMOSTAT DIAL: For controlling the 

temperature inside the freezer. Turns the motor  
on as soon as the temperature rises above the 
desired level.

2) FREEZER SHELVES: 2 full width freezer 

shelves.

3) MAGNETIC GASKET: Tight fitting door seal 

keeps all the cooling power locked inside. No 
hooks or latches.

4) DOOR BINS (4)
5) DRIP TRAY

CAUTION: To avoid personal injury to yourself and/or property,
we recommend someone assist you during the door reversal
process.
1) To access the lower hinge assembly, tilt back the freezer cabinet

(Fig.A)

2) Remove both leveling legs located at the front of the cabinet. 
3) Remove the screws holding the lower hinge assembly to the 

cabinet.

4) Remove the main door assembly from the freezer cabinet (lift 

door slightly and pull downward).

5) Using a flat head screwdriver, remove the main door top hinge 

pin.(Fig.B)

6) Re-install the main door top hinge pin on the opposite side of 

the cabinet.

7a) Remove the door plug and door bushing located on the top of 

the main door.

7b) Interchange their positions (eg.door plug right side, door 

bushing left side).

8) Re-install main door assembly on cabinet.
9) Remove door bushing (bottom door) and install on opposite 

side.

10) Re-install the lower hinge assembly on the opposite side.
11) Make sure the door assembly is properly aligned on the 

cabinet before tightening lower hinge screws.

12) Re-install both leveling legs. The process is now complete.

3