CoolIT Domino A.L.C. DM-1000 사용자 설명서
제품 코드
DM-1000
System Alert (flashes)
Fan
Speed
Speed
Pump
Speed
Speed
Coolant
Temperature
Temperature
Operating
Mode
O
PERATING
I
NSTRUCTIONS
Status Display
Mode Button
Push Button Mode Control
I
NSTALLATION
P
ROCEDURE
For AMD AM2/AM2+ Motherboards
Note: The existing backplate is reused for the installation of Domino A.L.C..
Remove the OEM heat sink from the processor. Then remove heat sink reten‐
tion bracket from motherboard by unscrewing the four Philips head screws
(Fig 6).
tion bracket from motherboard by unscrewing the four Philips head screws
(Fig 6).
Caution: backplate may fall away from motherboard. If this occurs, remove
motherboard then reposition backplate and tape in place.
motherboard then reposition backplate and tape in place.
Clean Thermal Compound from CPU Cap using a paper towel or a clean cloth
and install the four provided standoffs into the backplate mounting holes (Fig
7).
and install the four provided standoffs into the backplate mounting holes (Fig
7).
Install standoffs [Part G] into the holes from which you removed the heatsink
retention frame.
retention frame.
Carefully remove motherboard and position appropriate backplate (LGA 1366
[Part C] or LGA 775 [Part D]) on the underside of the board. It is recom‐
mended to make use of the double‐sided tape provided on the backplate to
hold it in place. This will aid with installation process.
Remount the motherboard.
[Part C] or LGA 775 [Part D]) on the underside of the board. It is recom‐
mended to make use of the double‐sided tape provided on the backplate to
hold it in place. This will aid with installation process.
Remount the motherboard.
Figure 6
Figure 7