Smeg S2772TCU 사용 및 관리

NOTE: When an icon is pressed the unit beeps to confirm. 

To operate the panel of the cooktops equipped with touch-controls, lightly press the icons printed on its
surface.

NOTE: On first connection to the electrical mains, an operating check will be automatically carried out
and all the indicator lights will come on for a few seconds.

When not in use, all cooktop components will be switched off. Hold down 

 for 2 seconds to turn the

cooktop on; a LED will turn on above the symbol to confirm that the cooktop is on. If no functions are
used within 30 seconds of turning the cooktop on, it will automatically shut itself off.

The associated cooking zone is indicated close to each control zone. For example, the symbol 
identifies the knob that controls the rear right-hand cooking zone.

After turning on the cooktop as described in paragraph "6.1 Turning on the cooktop", press the keys 
and 

 to activate the cooking zone (display indicating 0) and adjust to the desired power setting.

The power settings range from a minimum of 1 to a maximum of 9.

You must adjust the power within 5 seconds from when the cooking zone is activated, otherwise it will
automatically deactivate.

Press the 

 and 

 buttons in the following way to activate the cooking zone and adjust its power:

1 press the symbol 

 (0 appears on the display: this means that the cooking zone is activated);

2 by continuing to press the symbol 

, you can adjust the power of the cooking zone up to the

maximum value of 9;

3 if you instead press the symbol 

, adjust the power of the cooking zone down to the minimum value

of 1.

To activate heating of the dual cooking zone, once power 9 is reached by following the instructions
provided in paragraph "6.2 Single cooking zones", press the 

 again. Now the maximum power of the

cooking zone is activated, which is confirmed by the LED light turning on next to the number indicating
the operating power. Press the symbols 

 and 

 to adjust the power of the dual cooking zone to the

desired value.