Moen 7590X 사양 시트
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
8-1/2"
(216mm)
8-1/8"
(206mm)
5"
(127mm)
5-3/8"
(137mm)
14"
(356mm)
15"
(381mm)
Spout & Handle
Escutcheon
2-1/2" wide
(64mm)
7-1/2"
(191mm)
8-3/4"
(222mm)
2-1/2" (51mm)
MAX. DECK
THICKNESS
Aberdeen™
Single Handle High Arc Pulldown
Kitchen Faucet
Models: 7590C, 7590ORB, 7590W, 7590V,
7590CPR, 7590SL, 86590C
ADA
NOTE: DESIGNED TO INSTALL
THRU 2 HOLES 1-1/4” (32mm) MIN. DIA.
FAUCET DESCRIPTION
• High arc spout provides the height and reach to fill or
• High arc spout provides the height and reach to fill or
clean large pots while the pulldown feature provides the
infinite maneuverability for cleaning or rinsing
infinite maneuverability for cleaning or rinsing
• Hydrolock
®
quick connect system
• Metal construction with 6 finishes
• Pulldown spray with 68" braided hose
• 1/2" IPS connections will accept standard ball nose
• Pulldown spray with 68" braided hose
• 1/2" IPS connections will accept standard ball nose
connection for 3/8" tubing
OPERATION
• Single handle lever
• When filling a vessel outside of the sink, the pause feature
• Single handle lever
• When filling a vessel outside of the sink, the pause feature
conveniently stops the flow of water as the wand passes over
the countertop
the countertop
• Convenient single-button actuation provides flexibility to
switch from stream to spray mode
FLOW
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless
• Flow is limited to 2.2 gpm (8.3 L/min) at 60 psi
CARTRIDGE
• 1225 cartridge design
• Engineered polymers, non-ferrous and stainless
steel materials
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1
• Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements therein
• Certified to ANSI/NSF 61/9
• Complies with California Proposition 65 and with the Federal
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
• The backflow protection system in this device consists of two
independently operating check valves, a primary and a secondary
which prevent backflow.
which prevent backflow.
WARRANTY
• Lifetime limited warranty against leaks, drips and
• Lifetime limited warranty against leaks, drips and
finish defects to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 4/07
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.