Monogram ZV925SLSS 설치 설명서
19
Installation Instructions
STEP 4 INSTALL UPPER SUPPORT FRAME
• Raise the upper support
toward the ceiling.
• Thread the house wiring
through one of the large
holes, preferably on the
left side.
holes, preferably on the
left side.
• Carefully engage the
ceiling mounting screws
to the keyhole slots in
the top of the frame.
to the keyhole slots in
the top of the frame.
• Tighten the 4 mounting
screws against the frame.
• Install 2 safety screws.
• Slide air deflector into
the support frame.
• Secure the deflector
to the support with
4 screws.
4 screws.
• Install the duct
piece to the
bottom of the
deflector and seal
the connection
with duct tape.
bottom of the
deflector and seal
the connection
with duct tape.
Keyhole
slots
Safety
screws
House
wiring
Keyhole
slots
INSTALLATION—RECIRCULATING
STEP 3 INSTALL AIR DEFLECTOR,
CUT DUCT FOR RECIRCULATING
OPERATION
OPERATION
FRONT
• Temporarily, slide the
air deflector into the
support frame.
support frame.
FRONT
• Measure duct length
between the deflector and
over the exhaust opening.
over the exhaust opening.
• Cut duct piece to length
and set aside.
Duct
length