Crossover DAWF0GNM 사용자 매뉴얼

26

Program Location 07 (PL07)

Perm Press Temp

Location to be viewed/changed.

Press “Perm Press” key.

Display will read “PP°F,” “Perm Press”

temperature key status for 3-seconds

and then actual temperature programmed.

If no change, press “Perm Press” key

otherwise press “HI” or “LO” key

and then “Perm Press” key.

Temperature Decrease

Temperature Increase

Summary: Perm Press Temp is programmable from a minimum of 100 ° F to a maximum of 190 ° F in ten-degree increments or

from a minimum of 38° C to a maximum of 88° C in five-degree increments.

PL07

PP°F

Perm Press

130F

HI Temp

Perm Press

LO Temp

Refer to Programming

Instructions for instructions on

entering program locations.

(Wait 3-Seconds)

Automatically goes into PL08 Program without PL08 Display Mode

Continued on next page

NOTICE: To eliminate potential 

overheating do not set temperature 

in PL03, PL05, and PL07 above 

150° F (65° C)