Movincool CLASSICPLUS14 서비스 매뉴얼

Operation Section

20

• The evaporator is a heat exchanger covered with spine fins. Heat is removed from the air being

pulled across the evaporator by the centrifugal fan and the resulting cool air is expelled through

the cool air vent.

•The accumulator is mounted on the suction gas 

piping between the evaporator and the

compressor. The accumulator separates the

liquid refrigerant from the gas refrigerant,

allowing only the gas refrigerant to enter the

compressor. In the accumulator, suction gas is

led into a cylindrical vessel where the speed of

the gas is decreased. This process separates

the refrigerant contained in the gas by the force

of gravity, causing the refrigerant to accumulate at the bottom of the vessel. As a result, the

compressor is protected from possible damage caused by liquid refrigerant intake.

I000514

From Evaporator

To Compressor