Miele PG8056208V 지침 매뉴얼
Frequently asked questions
96
Unusual behavior of the dishwasher
Problem
Possible cause and solution
The dishwasher fails to
react when buttons are
pressed. The display and
indicator lights remain
dark.
The dishwasher has turned itself off after the set "switch off
after" duration to save energy.
Press the button to turn the dishwasher back on.
The following fault
message is appears in the
display:
Salt container lid not closed
correctly
correctly
The salt reservoir cover is not properly closed.
Close the salt reservoir cover.
The dispenser cover
cannot be closed.
Detergent residue is blocking the latch.
Remove the detergent residue.
The inside of the door
and/or the interior walls
are wet after a program
has finished.
This is not a fault.
It is caused by the drying system.
The moisture will dissipate after a short while.
Water remains in the wash
cabinet at the end of the
program.
Before fixing the fault:
Turn the dishwasher off with the button.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see "Cleaning and care").
The drain pump or non-return valve is blocked.
Clean the drain pump or the non-return valve (see
"Frequently asked questions").
The drain hose kinked.
Remove the kink.
The on-site drain siphon is blocked.
Check and clean the drain siphon.