Summit FF63BBIIFADA 설치 설명서

DETAIL A

DETAIL B

1) Remove Door from Chassis by unscrewing
    3 screws in Top Hinge and 2 screws in Bottom
    Hinge. Keep screws, discard hinges.

2) Attach customer supplied handle to Door Panel
    using countersunk screws.

3) Screw Door panel to Frame using 14 screws.

4) Slide Frame over Refrigerator door and attach
    with 1 screw on each side, center of door.

5) Screw Bottom Pc to Door with 2 screws.

6) Attach Top Brace to Frame with 1 screw on side.
    Attach Bottom Brace in the same manner.

7) Drill a hole thru the Top and Bottom Frame using
    the Braces as a guide with a 5/32" drill bit. Install
    screws to finish attaching the Top and Bottom
    Braces securely to the Frame.

8) Drill a hole into the Door Panel from the top and
    bottom using the Braces as a guide with a 1/4"
    drill bit. Do not exceed 5/8". This is the hole that
    the door will pivot on.

9) Remount the door using the supplied Top and
    Bottom Hinges.

Top Hinge

Bottom Brace

Frame

Bottom
Pc

Step 7

Step 4

Step 8

Top Brace

Step 6

Instructions for
Integrated Frame

Summit Appliance
1-718-893-3900

(Built-In Application)

Door Panel
23 5/16" x 28 1/4" FF7
19 1/2" x 31 1/2" FF511
14 5/8" x 30" SCR1536B
SWC1535B

Hinge FF7
or SCR1536B
SWC1535B

Hinge FF511