Summit FF61BIDPL 사용자 매뉴얼
9
Care and Maintenance
Cleaning Your Appliance:
1.
Unplug the appliance, turn the thermostat to STOP (0) and remove all contents,
including shelves and crisper.
including shelves and crisper.
2.
Wash the inside surfaces with a solution of lukewarm water and vinegar. Wipe
dry with a clean, soft cloth.
dry with a clean, soft cloth.
3.
Wash the shelves and crisper with a mild detergent solution, then rinse and dry
thoroughly.
thoroughly.
4.
Wash the outside cabinet with a solution of warm water and mild liquid detergent.
Rinse well and wipe dry with a clean soft cloth.
Rinse well and wipe dry with a clean soft cloth.
5.
Wring excess water out of the sponge or cloth before cleaning the area of the
temperature control or any electrical parts.
temperature control or any electrical parts.
6.
From time to time, wipe the condenser on the back wall with a soft
non-metallic brush or vacuum cleaner.
non-metallic brush or vacuum cleaner.
7.
After you have cleaned the appliance, reconnect it to the power
supply, reset the thermostat and return all contents to their place.
supply, reset the thermostat and return all contents to their place.
CAUTION: Failure to unplug the unit before cleaning or maintenance
could result in electrical shock or personal injury.
Power Failure:
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need to take
the proper steps to protect your chilled items.
temperature of your appliance if you minimize the number of times the door is
opened. If the power is going to be off for a longer period of time, you need to take
the proper steps to protect your chilled items.
Vacation Time:
During long absences, remove all contents. Unplug the appliance, clean it and leave the
door open slightly to avoid possible formation of condensation, mold or odors.
door open slightly to avoid possible formation of condensation, mold or odors.
Moving Your Appliance:
1. Remove the contents.
2. Securely tape down all shelving inside the unit.
3. Turn the leveling legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation.
2. Securely tape down all shelving inside the unit.
3. Turn the leveling legs up to the base to avoid damage.
4. Tape the door shut.
5. Be sure the appliance stays secure in the upright position during transportation.
Energy-Saving Tips:
•
The unit should be located in the coolest area of the room, away from heat-
producing appliances or heating ducts and out of direct sunlight.
producing appliances or heating ducts and out of direct sunlight.
•
Try not to open the door too often, especially when the weather is damp and hot.
Once you open the door, close it as soon as possible.
Once you open the door, close it as soon as possible.
•
Occasionally check if the appliance is sufficiently ventilated (adequate air
circulation behind and at the front of the appliance).
circulation behind and at the front of the appliance).
•
Set the thermostat from higher to lower settings as soon as possible (depending
on how loaded the appliance is, ambient temperature, etc.).
on how loaded the appliance is, ambient temperature, etc.).
•
Before loading items into the unit, be sure they have cooled to ambient
temperature.
temperature.