Linksys EA9200 사용자 설명서

Linksys EA9200

Troubleshooting

If you get a “Your Internet cable is not plugged in” message when trying to set 
up your router, follow these troubleshooting steps.

Make sure that an Ethernet cable (or a cable like the one supplied with your 
router) is securely connected to the yellow Internet port on the back of the 
router and to the appropriate port on your modem. This port on the modem 
is usually labeled Ethernet.

Back view of router

Back view of cable modem

Back view of DSL modem

Make sure that your modem is connected to power and is turned on. If it has a 
power switch, make sure that it is set to the ON or l position.

If your Internet service is cable, verify that the cable modem’s CABLE port is 
connected to the coaxial cable provided by your ISP.

Or, if your Internet service is DSL, make sure that the DSL phone line is 
connected to the modem’s DSL port.

If your computer was previously connected to your modem with a USB cable, 
disconnect the USB cable.

Install the router again.

To access your router, you must be connected to your own network. If you 
have wireless Internet access, the problem may be that you have accidentally 
connected to a different wireless network.

To fix the problem on Windows computers:

1.  On your Windows desktop, right-click the wireless icon in the system tray. 

The icon can differ depending on your version of Windows.

2.  Click View Available Wireless Networks. A list of available networks 

appears.