Canon T5 사용자 설명서
82
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
the subject’s brightness. This is called Program AE.
1
Set the Mode Dial to <d>.
2
Focus on the subject.
Look through the viewfinder and aim
the selected AF point over the
subject. Then press the shutter button
halfway.
the selected AF point over the
subject. Then press the shutter button
halfway.
X
The dot inside the AF point achieving
focus lights up briefly in red, and the
focus confirmation light <o> on the
viewfinder’s bottom right lights up (in
One-Shot AF mode).
focus lights up briefly in red, and the
focus confirmation light <o> on the
viewfinder’s bottom right lights up (in
One-Shot AF mode).
X
The shutter speed and aperture will
be set automatically and displayed in
the viewfinder.
be set automatically and displayed in
the viewfinder.
3
Check the display.
A standard exposure will be obtained
as long as the shutter speed and
aperture displays do not blink.
as long as the shutter speed and
aperture displays do not blink.
4
Take the picture.
Compose the shot and press the
shutter button completely.
shutter button completely.
d: Program AE
If you use a TS-E lens to shift or tilt the lens or use an Extension Tube, the
standard exposure may not be obtained or an irregular exposure may result.
standard exposure may not be obtained or an irregular exposure may result.
COP
Y