Bose® SoundLink III 사용자 설명서

Pair another device to the speaker by making the speaker discoverable.
1.  Press Bluetooth

®

   on the speaker, so the Bluetooth status indicator    

blinks blue.

2.  On your device, turn Bluetooth on, locate the Bluetooth device list, and select 

the  device named “Bose SLIII.” If your device prompts you for a passcode, 

enter “0000” (four zeros). 
When the device connects to the speaker, the  Bluetooth status indicator turns 

to solid white.

Note:  You can switch between connecting/connected and discoverable by 

 pressing   Bluetooth on the speaker. 

The speaker can remember up to six paired devices. If you pair the speaker with 

an additional device, the device least recently connected is no longer paired with 

the speaker.
Note:  To clear the speaker memory of all devices, press and hold Bluetooth   

(about 10 seconds) until you hear a tone. All devices are cleared and the 

speaker becomes discoverable.

When turned on, the speaker attempts to reconnect with a device in memory 

 starting with the last connected device. If the last connected device is not 

 available, the speaker connects to the next to last connected device, and so forth. 

The speaker searches for a paired device for approximately 30 seconds.

You can switch the speaker from your connected device to another previously 

paired  device. The device you are switching to must be in the speaker memory.
1.  On your previously paired device, make sure Bluetooth is turned on.
2.  Press Bluetooth   on the speaker to make the speaker discoverable. 

The Bluetooth status indicator   speaker blinks blue to show the speaker 

is discoverable.

3.  On your device, select “Bose SLIII” from the Bluetooth device list.

The Bluetooth status indicator blinks white, while the speaker attempts to con-

nect to the device.
When the speaker and Bluetooth device have  successfully connected, the 

 Bluetooth status indicator changes from blinking to solid white and the 

speaker emits a tone.

Operation