Bose® Wave SoundTouch 사용자 매뉴얼
24 - English
Personalizing Your Wave® SoundTouch™ Music System
Setting the room code
Note: This setting is not applicable when using the SoundTouch™
pedestal.
The Wave
®
music system comes from the factory ready to operate
as a second room (room code B) when connected to a Bose
®
link
enabled Lifestyle
®
system. If you want to use your Wave
®
music
system with your Lifestyle
®
system beyond a second room you will
need to change the room code to match that of the remote control
you are using for that room.
Refer to your Lifestyle
Refer to your Lifestyle
®
system owner’s guide for more information
on room codes.
1. Press and hold
until
-SETUP mENU- is displayed.
2. Press
repeatedly until
ROOm- B is displayed.
The dashes following the room letter indicate how the
microswitches should be set on the Lifestyle
®
remote control.
3. Press
to select a room code other than room B.
4. Press
to exit the setup menu
or wait 10 seconds for the setup menu to exit automatically.
Turning the touch pad on or off
If you do not wish to use the touch pad feature you can turn it off.
1. Press and hold
until
-SETUP mENU- is displayed.
2. Press
repeatedly until
TOUCH PAD- is displayed.
3. Press
to select
OFF or ON.
4. Press
to exit the setup menu
or wait 10 seconds for the setup menu to exit automatically.
Changing the system standby timer
1. Press and hold
until -
SETUP mENU- is displayed.
2. Press
repeatedly until
AUTO OFF- is displayed.
3. Press
to select
NO or yES.
4. Press
to exit the setup menu
or wait 10 seconds for the setup menu to exit automatically.
Performing a system reset
If you wish, you can restore your Wave
®
SoundTouch™ music
system to the original factory settings.
Note: This reset function erases all saved presets only in the
Note: This reset function erases all saved presets only in the
Wave
®
music system. To reset the SoundTouch™ pedestal,
use the SoundTouch™ app.
1. Press and hold
until
-SETUP mENU- is displayed.
2. Press
repeatedly until
RESET ALL- NO is displayed.
3. Press
to change
RESET ALL- NO
to
RESET ALL- yES.
4. When PRESS PRESET 3 TO CONFIRm is displayed,
press
Presets
.
When the reset is complete,
RESET COmPLETE is displayed.
5. Press
to exit the setup menu
or wait 10 seconds for the setup menu to exit automatically.