Canon T5I 사용자 가이드

212

Handy Features

Vertical images are rotated automatically so they 
are displayed vertically on the camera’s LCD 
monitor and on the personal computer instead of 
horizontally. You can change the setting for this 
feature.

Under the [51] tab, select [Auto rotate], 
then press <0>. The available settings 
are described below. Select the option, 
then press <0>.

 

[OnzD] : The vertical image is automatically rotated during playback 

on both the camera’s LCD monitor and on the computer.

 

[OnD]

: The vertical image is automatically rotated only on the 

computer.

 

: The vertical image is not automatically rotated.

 

The vertical image is not rotated during the image review 
immediately after it is captured.
Press the <x> button and the image playback will display the 
rotated image.

 

[OnzD] is set, but the image does not rotate during playback.
Auto rotate will not work with vertical images captured while [Auto 
rotate] was set to [Off]. If the vertical image is taken while the camera 
is pointed up or down, the image may not be rotated automatically for 
playback. In such a case, see “Rotating the Image” on page 247.

 

On the camera’s LCD monitor, I want to rotate an image 
captured when [OnD] had been set.
Set [OnzD], then play back the image. It will be rotated.

 

The vertical image does not rotate on the computer screen.
The software used is not compatible with image rotation. Use the 
software provided with the camera instead.

3

COP

Y