Canon T5I 사용자 가이드
218
The built-in flash and external Speedlite settings can be set with the
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if an EX-series Speedlite compatible
with this function is attached.
The setting procedure is the same as when setting a camera menu
function.
camera’s menu. You can use the camera’s menu to set the external
Speedlite function settings only if an EX-series Speedlite compatible
with this function is attached.
The setting procedure is the same as when setting a camera menu
function.
Select [Flash control].
Under the [z1] tab, select [Flash
control], then press <0>.
control], then press <0>.
X
The flash control screen will appear.
Normally, set this to [Enable].
If [Disable] is set, neither the built-
in flash nor the external Speedlite
will fire. This is useful when you only
want to use the flash’s AF-assist
beam.
in flash nor the external Speedlite
will fire. This is useful when you only
want to use the flash’s AF-assist
beam.
For normal flash exposures, set this
to [Evaluative].
to [Evaluative].
[Average] is for advanced users. As
with an external Speedlite, the
metering area is averaged. Flash
exposure compensation may be
necessary.
with an external Speedlite, the
metering area is averaged. Flash
exposure compensation may be
necessary.
3
Setting the FlashN
[Flash firing]
[E-TTL II meter.]
Even if [Flash firing] is set to [Disable], if focus is difficult to achieve in low
light, the flash may still fire a series of flashes (AF-assist beam, p.101).
light, the flash may still fire a series of flashes (AF-assist beam, p.101).
COP
Y