Canon T5I 사용자 가이드

다운로드
페이지 388
227
3
 Manual Sensor CleaningN
 
While cleaning the sensor, never do any of the following. If the 
power is cut off, the shutter will close and the shutter curtains and 
image sensor may get damaged.
• Setting the power switch to <2>.
• Opening the battery compartment cover.
• Opening the card slot cover.
 
The surface of the image sensor is extremely delicate. Clean the sensor 
with care.
 
Use a plain blower without any brush attached. A brush can scratch the 
sensor.
 
Do not insert the blower tip inside the camera beyond the lens mount. If 
the power is turned off, the shutter will close and the shutter curtains or 
reflex mirror may get damaged.
 
Never use canned air or gas to clean the sensor. The blowing force can 
damage the sensor or the spray gas can freeze on the sensor.
 
If the battery level becomes low while you clean the sensor, the beeper 
will sound as a warning. Stop cleaning the sensor.
 
If a smudge that cannot be removed with a blower remains, having the 
sensor cleaned by a Canon Service Center is recommended.
COP
Y