Canon T5I 사용자 가이드
281
Preparing to Print
6
Play back the image.
Press the <
x
> button.
X
The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
w
PictBridge
Before using the printer, make sure it has a PictBridge connection port.
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. Resolve the problem displayed in the error message (p.288).
printer. Resolve the problem displayed in the error message (p.288).
Printing is not possible if the <F> or <G> shooting mode or Multi Shot
Noise Reduction has been set.
Noise Reduction has been set.
You can also print 1 images taken with this camera.
If you use a battery pack to power the camera, make sure it is fully
charged. With a fully-charged battery, printing up to approx. 3 hr. 30 min
is possible.
charged. With a fully-charged battery, printing up to approx. 3 hr. 30 min
is possible.
Before disconnecting the cable, first turn off the camera and printer. Hold
the plug (not the cord) to pull out the cable.
the plug (not the cord) to pull out the cable.
For direct printing, using AC Adapter Kit ACK-E8 (sold separately) to
power the camera is recommended.
power the camera is recommended.
COP
Y