Canon T5I 사용자 가이드
Troubleshooting Guide
334
It is the highlight alert (p.272). Overexposed highlight areas with a loss
of highlight detail will blink.
of highlight detail will blink.
If the image is protected, it cannot be erased (p.266).
Movies edited with a personal computer using the provided
ImageBrowser EX (p.364) or other software cannot be played back
with the camera. However, video snapshot albums edited with EOS
Video Snapshot Task (p.195) can be played back on the camera.
ImageBrowser EX (p.364) or other software cannot be played back
with the camera. However, video snapshot albums edited with EOS
Video Snapshot Task (p.195) can be played back on the camera.
If you operate the camera’s dials or lens during movie shooting, the
operation noise will also be recorded. Using an external microphone
(commercially available) is recommended (p.198).
operation noise will also be recorded. Using an external microphone
(commercially available) is recommended (p.198).
During autoexposure movie shooting, if there is a drastic change in the
exposure level, the recording will stop momentarily until the brightness
stabilizes. If this happens, shoot with <a> shooting mode (p.177).
exposure level, the recording will stop momentarily until the brightness
stabilizes. If this happens, shoot with <a> shooting mode (p.177).
Make sure the stereo AV cable or HDMI cable’s plug is inserted all the
way in (p.262, 265).
way in (p.262, 265).
Set the video OUT system (NTSC/PAL) to the same video system as
the TV set (p.265).
the TV set (p.265).
Playback Problems
Part of the image blinks in black.
The image cannot be erased.
The movie cannot be played back.
When the movie is played back, camera operation noise
can be heard.
can be heard.
The movie has still moments.
No image appears on the TV screen.
COP
Y