Canon T5I 사용자 가이드

다운로드
페이지 388
337
If there is a problem with the camera, an 
error message will appear. Follow the on-
screen instructions.
If the error still persists, write down the error number and contact your 
nearest Canon Service Center.
Error Codes
Number
Error Message and Solution
01
Communications between the camera and lens is faulty. Clean the 
lens contacts.
Î
Clean the electrical contacts on the camera and lens or use a 
Canon lens (p.17, 20).
02
Card cannot be accessed. Reinsert/change card or format card 
with camera.
Î
Remove and insert the card again, replace the card, or format the 
card (p.31, 48).
04
Cannot save images because card is full. Replace card.
Î
Replace the card, erase unnecessary images, or format the card 
(p.31, 268, 48).
05
The built-in flash could not be raised. Turn the camera off and on 
again.
Î
Operate the power switch (p.34).
06
Sensor cleaning is not possible. Turn the camera off and on 
again.
Î
Operate the power switch (p.34).
10, 20,
30, 40,
50, 60,
70, 80,
99
Shooting is not possible due to an error. Turn the camera off and 
on again or re-install the battery.
Î
Operate the power switch, remove and install the battery pack 
again, or use a Canon lens (p.34, 30).
Error number
Countermeasures
COP
Y