Maytag MHW6000AW 사용 및 관리
21
Not using correct cycle for fabric type.
Use a higher soil level setting and warmer wash temperature
to improve cleaning.
If using Rapid Wash cycle, wash only a few items.
Use Power Wash cycle for tough cleaning.
Add an extra rinse for heavily soiled loads.
If using Rapid Wash cycle, wash only a few items.
Use Power Wash cycle for tough cleaning.
Add an extra rinse for heavily soiled loads.
If you experience
Possible Causes
Solution
First try the solutions suggested here or visit our website at www.maytag.com/product_help –
In Canada www.maytag.ca for assistance and to possibly avoid a service call.
Washer not performing as expected (cont.)
Empty pockets, zip zippers, and snap or hook fasteners before
washing to avoid snags and tears.
Sharp items were in pockets during
wash cycle.
Strings and straps could have tangled.
Items may have been damaged before
Items may have been damaged before
washing.
Mend rips and broken threads in seams before washing.
Fabric damage can occur if washer is
tightly packed.
Liquid chlorine bleach may have been
added incorrectly.
Do not pour liquid chlorine bleach directly onto load. Wipe up
bleach spills.
Undiluted bleach will damage fabrics. Do not use more than
Undiluted bleach will damage fabrics. Do not use more than
recommended by manufacturer.
Avoid tightly packing the washer. Load with dry items only.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Use cycle designed for the fabrics being washed.
Add only 1 or 2 garments after washer is started.
Tie all strings and straps before starting wash load.
Fabric Damage
The transfer of dye can occur when mixing whites and colors in
a load. Sort dark clothes from whites and lights.
Use hot or warm temperatures if safe for the load. Make sure your
Use hot or warm temperatures if safe for the load. Make sure your
hot water system is adequate to provide a hot water wash.
Use more detergent for washing heavy soils in cold or hard water.
Use more detergent for washing heavy soils in cold or hard water.
Load not sorted properly.
Gray whites, dingy colors
Wash temperatures too low.
Not enough detergent used, or hard
water.
Monthly maintenance not done as
recommended.
Run the Clean Washer cycle with affresh
®
monthly. See “Washer
Care” in “Washer Maintenance.”
Unload washer as soon as cycle is complete. Use the
Unload washer as soon as cycle is complete. Use the
Fresh Hold
®
/Fresh Spin
™
option if load cannot be removed
immediately after the wash is complete.
Use only HE detergent. Be sure to measure correctly. Always follow
Use only HE detergent. Be sure to measure correctly. Always follow
the manufacturer’s directions.
See “Washer Care” section.
This washer has a tight seal to avoid water leaks. To avoid odors,
See “Washer Care” section.
This washer has a tight seal to avoid water leaks. To avoid odors,
leave the door open to allow the washer to dry between uses.
Odors
Not using HE detergent or using too
much HE detergent.
Door not left open after use.
Not washing like colors together.
Wash like colors together and remove promptly after the cycle is
complete to avoid dye transfer.
Use more detergent for washing heavy soils in cold or hard water.
Use more detergent for washing heavy soils in cold or hard water.
Not enough detergent used, or hard
water.
Not cleaning or
removing stains (cont.)
Not using dispensers.
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly to load.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not add products directly to load.
TROUBLESHOOTING