Samsung NE595R0ABSR 사용자 매뉴얼

TROUBLESHOO

TING

Troubleshooting _56

The oven controls have been set 

incorrectly.

•   Press the BROIL pad.

The rack has not been properly 

positioned.

•   See the broiling guide on page 41.

Cookware not suited for broiling.

•   Use suitable cookware.

In some areas the power (voltage) 

may be low.

•   Preheat the broil element for 10 minutes.

•   See the broiling guide on page 41.

The oven sensor needs to be 

adjusted.

•   See the section on adjusting the 

thermostat on page 46.

The cooktop is being cleaned 

improperly.

•   Scratches are not removable. Tiny 

scratches will become less visible in time 

as a result of cleaning.

Cookware with rough bottoms 

were used on the cooktop or 

there were coarse particles (eg. 

salt or sand) present between the 

cookware and the surface of the 

cooktop.

•   To avoid scratches, use the recommended 

cleaning procedures. Make sure the 

bottoms of cookware are clean before use, 

and use cookware with smooth bottoms.

Cookware has been slid across the 

cooktop surface.

Boilovers have been cooked onto 

the surface.

•   Use the blade scraper to remove soil.

•   See the section on care and cleaning of 

the glass cooktop on page 54.

Mineral deposits from water and 

food have been left on the surface 

of the cooktop.

•   Remove using a ceramic-glass cooktop 

cleaning cream.

•   Use cookware with clean, dry bottoms.

The oven temperature is too high 

to set a self-clean operation.

•   Allow the range to cool and reset the 

controls.

The oven controls have been set 

incorrectly.

•   See the section on self-cleaning on page 

47.

A self-cleaning cycle cannot be started if the oven lockout feature has been 

activated or if a radiant surface element is on.

This is the sound of the metal 

heating and cooling during 

both the cooking and cleaning 

functions.

•   This is normal.

There is excessive soiling in the 

oven.

•   Press the CLEAR/OFF pad. Open the 

windows to rid the room of smoke. Wait 

until the self-cleaning cycle is cancelled. 

Wipe up the excessive soil and reset the 

oven for self-cleaning.

The oven is too hot.

•   Allow the oven to cool.

The oven controls were not set 

correctly.

•   See the section on self-cleaning on page 

49.

The oven was heavily soiled.

•   Wipe up heavy spillovers before starting 

the self-cleaning cycle. Heavily soiled 

ovens may need to self-clean again or for 

a longer period of time.

NE595R0ABSR_AA_DG68-00433A-04_EN.indd   56

2013-05-23   �� 5:05:31