Sony ICFC1PJ 사용자 매뉴얼

ICF-C1PJ_U2 [US] 4-528-478-

11(2)

Display

Projector unit

Projector lens

AC power cord

FM wire antenna

Use the tactile dots on 

VOL/SET + and TUNING + and the tactile characters on 3 

(

NATURE SOUND/PRESET) and ALARM RESET/OFF as a guide when operating the 

unit.



To change the clock setting manually, operate 
the unit as follows.

  Press and hold 

SET TIME/DATE for 

more than 2 seconds.

The year will start to flash on the display.

 Press 

VOL/SET + or – repeatedly to 

select the year, and then press 
SNOOZE/BRIGHTNESS/ENTER.

  Repeat step 

2 to set the month, day 

and time.

After setting the time, a beep will sound.

 If you do not press any button for about 1 

minute while setting the clock, clock setting 
mode will be canceled.

 A 100-year calendar (2013 - 2112) is installed 

in the system.

You can choose between the 12-hour system 
(default) or the 24-hour system to display the 
time.

Press and hold 

ALARM RESET/OFF and 

SNOOZE/BRIGHTNESS/ENTER for about 
3 seconds.

The time format toggles between the 12-hour 
system (“AM 12:00” = midnight) and the 
24-hour system (“0:00” = midnight).

Press 

SET TIME/DATE once to display the 

month and day, and press again to display the 
year. To return to the current time display, press 
SET TIME/DATE once again; or after a few 
seconds the clock display will return 
automatically.

Change the clock setting manually if you have 
canceled the Automatic DST/summer time 
adjustment.

The projector function allows you to display the 
clock and the currently used alarm icons on a 
nearby wall or ceiling at a range of 0.5 m – 4 m 
(1 5/8 feet – 13 1/8 feet).

  Rotate the projector unit to point the 

projector lens in the desired direction.

 Press 

PROJECTION.

 Turn 

FOCUS to adjust the focus.

To turn off the projector, press 

PROJECTION 

again.

Press

 ROTATE PROJECTION repeatedly.

Each time you press

 ROTATE PROJECTION, the 

projection view rotates as Fig. 

.

 Do not stare into the lens directly.
 The projector function cannot be used unless 

the clock has been set.

 Certain walls and ceilings may not display 

the projection properly.

 The projector unit can be rotated 90° forward 

or backward from the upward position, and 
clicks when returned to the upward position.

 If the projector unit is rotated beyond its 

limits, it may be damaged.

 The projector will automatically turn off after 

16 hours.

 Press 

AM/FM/NATURE SOUND 

repeatedly to select the desired band 
(

AM or FM).

 Press 

TUNING + or – to tune to the 

desired station.

If you press and hold 

TUNING + or –, 

scanning starts. Scanning pauses when a 
station is found, and restarts after a few 
seconds. To stop scanning, press 

TUNING + 

or 

– (or SNOOZE/BRIGHTNESS/ENTER).

 Press 

VOL/SET + or – to adjust the 

volume.

To turn off the radio, press 

OFF.

You can preset 5 stations for FM and 5 stations 
for AM.

  Tune to the station you wish to preset.

  Press and hold the desired 

SOUND/PRESET (1 to 5) until you hear 
a beep.

Example: The following display appears 
when you preset FM 105.7 MHz to preset 
number 3 for FM.



The display shows the frequency for a few 
seconds and then changes back to the 
current time.
To change the preset station, tune to the 
desired station and press and hold the 
NATURE SOUND/PRESET (1 to 5) until you 
hear a beep.

 If you try to store another station with the 

same preset number, the previously stored 
station will be replaced.

 Press 

AM/FM/NATURE SOUND 

repeatedly to select the desired band 
(

AM or FM).

 Press 

NATURE SOUND/PRESET (1 to 5) 

where the desired station is stored.

 Press 

VOL/SET + or – to adjust the 

volume.

 If no station has been preset yet, “Non” 

appears on the display. Then the unit returns 
to the same state as in step 

1.

This unit includes 5 types of Nature Sounds: 
Sea Waves, Birds, Rain, Brook, and Under the 
Sea.

 Press 

AM/FM/NATURE SOUND 

repeatedly to select the Nature Sound.

  Press the desired 

PRESET (1 to 5).

Sea Waves

Birds

Rain

Brook

Under the Sea

To turn off the Nature Sound, press 

RESET/OFF.

 When other functions are in use, Nature 

Sounds are not available.

The dual alarm function allows you to set two 
alarm programs (

ALARM A and ALARM B).

The alarm time can be set for each program 
and the alarm sound can be selected from 
“RADIO” (radio), “BUZZ” (buzzer), or “NATURE” 
(Nature Sound).

 Make sure to set the clock. (See “Setting the 

clock manually.”)

 To set the radio alarm, first preset your 

favorite station. (See “To preset radio 
stations.”)

  Press and hold 

SET ALARM/ALARM A 

(or 

B) for more than 2 seconds.

While setting the alarm, “A” (or “B”) flashes 
on the display.

 Press 

VOL/SET + or – to select the 

desired hour, and press 

BRIGHTNESS/ENTER.

 Press 

VOL/SET + or – to select the 

desired minute, and press 

BRIGHTNESS/ENTER.

 Press 

VOL/SET + or – to select the 

desired alarm period (“WEEKDAY,” 
“WEEKEND,” or every day*), and press 
SNOOZE/BRIGHTNESS/ENTER.
*  In the case of every day, both 

“WEEKDAY” and “WEEKEND” are 
displayed.

 Press 

VOL/SET + or – to select the 

desired alarm mode (“RADIO,” “BUZZ,” 
or “NATURE”), and press 

BRIGHTNESS/ENTER.

When selecting “RADIO”
Proceed to “

 Setting the radio alarm.”

When selecting “BUZZ”
The setting is complete. The buzzer will 
sound at the set time, gradually increasing 
in volume. (“A” (or “B”) flashes on the 
display.)

When selecting “NATURE”
Proceed to “

alarm.”

 Setting the radio alarm

 Press 

VOL/SET + or – to select the AM 

band or FM band, and press 

BRIGHTNESS/ENTER.

 Press 

VOL/SET + or – (or NATURE 

SOUND/PRESET (1 to 5)) to select the 
preset number of desired station, and 
press 

SNOOZE/BRIGHTNESS/ENTER.

If no station has been preset yet
The preset number and “Non” appear on 
the display alternately. In this case, the 
buzzer will sound at the set time.

 Press 

VOL/SET + or – to adjust the 

volume, and press 

BRIGHTNESS/ENTER.

The setting is complete. The radio will turn 
on at the set time, gradually increasing in 
volume. (“A” (or “B”) flashes on the display.)

 Setting the Nature Sound alarm

 Press 

VOL/SET + or – (or NATURE 

SOUND/PRESET (1 to 5)) to select the 
desired Nature Sound, and press 
SNOOZE/BRIGHTNESS/ENTER.

 Press 

VOL/SET + or – to adjust the 

volume, and press 

BRIGHTNESS/ENTER.

The setting is complete. The Nature Sound 
will sound at the set time, gradually 
increasing in volume. (“A” (or “B”) flashes on 
the display.)

Press 

ALARM RESET/OFF to turn off the 

alarm.

The alarm will sound again at the same time 
the next weekday or the next weekend.

Press 

SNOOZE/BRIGHTNESS/ENTER.

The sound turns off, but will automatically 
come on again after about 10 minutes. 
Each time you press 

ENTER, the snooze time changes as follows:

The display shows the snooze time for a few 
seconds and returns to show the current time. 
(“A” (or “B”) flashes on the display.)

Press 

SET ALARM/ALARM A (or B).

“A” (or “B”) disappears from the display.

Set the alarm again.

 When the alarm setting is complete, the 

alarm time setting is displayed.

 If you press and hold SNOOZE/BRIGHTNESS/

ENTER for more than 2 seconds while setting 
the alarm, the alarm setting is immediately 
complete.

 If a second alarm sounds during a first (or 

the snooze function is active), the second 
alarm takes priority.

 If the same alarm time is set for both ALARM 

A and ALARM B, ALARM A takes priority.

 If no operation is performed while the alarm 

is sounding, the alarm will stop after about 
60 minutes.

 When Automatic DST/summer time 

adjustment is set, the alarm sounds as 
follows:
–  If the alarm is set to a time that is 

skipped as a result of daylight saving 

time starting, the alarm will sound when 

daylight saving time is applied.

–  If the alarm is set to a time that is 

doubled as a result of daylight saving 

time ending, the alarm will sound twice.

In the event of a power interruption, the alarm 
functions work until the battery is fully 
discharged. But certain functions may be 
affected as follows:
 The display will disappear.
 If the alarm sound is set to “RADIO” or 

“NATURE,” the buzzer will sound.

 If a power interruption occurs while the 

alarm is sounding, the buzzer will sound.

 If ALARM RESET/OFF is not pressed, the 

alarm will sound for about 5 minutes.

 If “” appears on the display, the alarm will 

not sound in the event of a power 
interruption. Replace the battery if “” 

appears.

 The snooze function will not work.
 During a power interruption, the alarm will 

sound only once at the set time.

You can fall asleep to the radio or Nature 
Sound using the sleep timer, which turns off 
the radio or Nature Sound automatically after a 
preset duration.

Press 

SLEEP while the radio or Nature 

Sound is playing.

“SLEEP” appears on the display.
Each time you press 

SLEEP, the duration (in 

minutes) changes on the display as follows:

The radio or Nature Sound will play for the 
duration you set, then shut off.
To deactivate the sleep timer, press 

SLEEP 

repeatedly to set the sleep timer to “OFF.”

Press 

ALARM RESET/OFF.

You can fall asleep to the radio or Nature 
Sound and also be awakened by the alarm at 
the preset time.

Set the alarm, then set the sleep timer.

 When you press SLEEP while the sleep timer 

is activated, the remaining time appears on 
the display.

 When the alarm is set to sound during the 

sleep timer duration, the sleep timer will be 
deactivated automatically when the alarm 
sounds.

Three levels of brightness are available.

Press 

SNOOZE/BRIGHTNESS/ENTER.

Each time you press 

ENTER, the brightness of the display changes 
as follows:

 You can also set the brightness of the display 

to off by pressing and holding 

BRIGHTNESS/ENTER.

 When the alarm is sounding or the snooze 

function is active, the brightness of the 
display cannot be changed.

 Even if the brightness is set to off, the display 

lights at a low brightness level when the 
alarm sounds.

You can charge a smartphone by connecting it 
to the unit using a USB cable (not supplied).

Smartphone

USB cable supplied 
with the smartphone

 There is no guarantee that this unit can be 

used to charge all products that can be 
charged via USB.

 This unit does not support power feeds 

greater than 5 V/1.5 A.

 Check the charge status on the smartphone.
 If a warning tone sounds, remove the 

smartphone from the unit.

 The reception sensitivity on the radio may 

worsen when charging a smartphone via 
USB.