Whirlpool WFW96HEAU 사용자 매뉴얼

Not all features and cycles are available on all models.

Touch to turn the washer on and off. Touch to stop/cancel  

a cycle at any time. 

Use your Wash Cycle knob to select available cycles on your 

washer. Turn the knob to select a cycle for your laundry load. 

See “Cycle Guide” for detailed descriptions of cycles.
NOTE: For best results when using the Wash & Dry cycle, 

use for loads weighing 2.5 pounds and less, such as a 

soccer uniform or a running tank and shorts.

Touch and hold until the light above START comes on to 

start a cycle, or touch once while a cycle is in process to 

pause it. If you want to add a garment, you can touch START 

when the “Add Garment” LED is on.

Use 

+ and – to delay the start of the wash cycle by up to  

12 hours. To turn off Delay Wash, use 

+ and – to set the 

delay time to “0,” or touch POWER.

When you select a cycle, its default settings will light up and 

the Estimated Time Remaining will be displayed. Factors such 

as load size, wash temperature, and water pressure may affect 

the time shown in the display during the cycle. Tightly packing 

garments, unbalanced loads, or excessive suds may cause the 

washer to adjust the cycle time, as well. 
Touch the desired option along the bottom of the display to 

adjust settings. See “Cycle Guide” for available settings on 

each cycle. Not all settings are available with all cycles.

For details, see “Cycle Status Lights”.
Wash Temp 

The recommended wash temperature is preset for each 

cycle. You may also select a wash temperature based on the 

type of fabric and soils being washed. For best results, follow 

the garment label instructions. All wash temperatures feature  

a cold rinse.
Spin

This washer automatically selects the spin speed based on 

the cycle selected. Some preset speeds can be changed. 

•  Faster spin speeds mean shorter dry times, but may  

increase wrinkling in your load. 

•  Slower spin speeds reduce wrinkling, but will leave  

your load more damp.

The Soil setting (wash time) is preset for each wash cycle. 

For most loads, use this preset soil level. When you change 

the soil setting, the cycle time will increase or decrease in the 

Estimated Time Remaining display. 
For heavily soiled and sturdy fabrics, use the Soil setting to 

select more wash time. For lightly soiled and delicate fabrics, 

use the Soil setting to select less wash time. Lower soil level 

settings will help reduce tangling and wrinkling.
Presoak 

Touch to add a Presoak time of your choice to a wash 

cycle. Items will gently tumble thorugh the detergent and 

water for the selected time to help loosen tough stains. 

NOTE: The control panel features a sensitive surface that responds  

to a light touch of your finger. To ensure your selections are registered, 

touch the control panel with your finger tip, not your fingernail. When 

selecting a setting or option, simply touch its name.

W10441071A v46.indd   4

5/24/12   2:40 PM