AT&T EL52203 사용자 매뉴얼

9

Getting started

Wall mount installation

The telephone base comes ready for tabletop use. If you want to mount your 
telephone on a wall, use the provided wall mount bracket to connect with 
a standard dual-stud telephone wall mounting plate. If you do not have this 
mounting plate, you can purchase one from many hardware or consumer 
electronics retailers. Professional assistance may be required to install the 
mounting plate.

Tabletop to wall mount installation
To change the telephone base from tabletop installation to wall mount 
installation, make sure you first unplug the power adapter from the electrical 
outlet and the telephone line cord from the telephone wall jack.

Plug the power cord and telephone line into the telephone base. If you 
are using a DSL filter, plug the other end of the telephone line into the 
filter. Route the telephone line cord (or DSL filter) through the wall mount 
bracket hole.
Position the telephone base, as shown below. Insert the extended tabs 
(see illustration 2) of the wall mount bracket into the slots on the back of 
the telephone base (marked 

B). Push the telephone base down until it is 

securely in place.

1.

2.

A DSL filter (not included) is 
required if you have DSL  
high-speed Internet service.

Wall mount 
bracket

1

2