Maytag MER8850DS 사용 및 관리

The control knobs can be set to anywhere between HIGH and 
LOW. Push in and turn to setting.

The surface cooking area will glow red when an element is on. 
Some parts of the surface cooking area may not glow red when an 
element is on. This is normal operation. It may cycle on and off to 
maintain the selected heat level. 
It is normal for the surface of light colored ceramic glass to appear 
to change color when surface cooking areas are hot. As the glass 
cools, it will return to its original color. 
Clean the cooktop after each use to help avoid scratches, pitting, 
abrasions and to condition the glass surface. Ceramic glass 
cooktop cleaner and a cooktop scraper are also recommended for 
stubborn soils. Do not use abrasive cleaners, cleaning pads or 
harsh chemicals for cleaning. The Cooktop Care Kit Part Number 
31605 contains all of the items needed to clean and condition your 
ceramic glass cooktop. Refer to the “Range Care” section for 
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface 
and to make soils easier to remove, clean the cooktop after each 
use to remove all soils.

■

Avoid storing jars or cans above the cooktop. Dropping a heavy 
or hard object onto the cooktop could crack the cooktop.

■

To avoid damage to the cooktop, do not leave a hot lid on the 
cooktop. As the cooktop cools, air can become trapped 
between the lid and the cooktop, and the ceramic glass could 
break when the lid is removed.

■

For foods containing sugar in any form, clean up all spills and 
soils as soon as possible. Allow the cooktop to cool down 
slightly. Then, while wearing oven mitts, remove the spills using 
a scraper while the surface is still warm. If sugary spills are 
allowed to cool down, they can adhere to the cooktop and can 
cause pitting and permanent marks.

■

To avoid scratches, do not slide cookware or bakeware across 
the cooktop. Aluminum or copper bottoms and rough finishes 
on cookware or bakeware could leave scratches or marks on 
the cooktop.

■

Do not cook popcorn in prepackaged aluminum containers on 
the cooktop. They could leave aluminum marks that cannot be  
completely removed.

■

To avoid damage to the cooktop, do not allow objects that 
could melt, such as plastic or aluminum foil, to touch any part 
of the entire cooktop.

■

To avoid damage to the cooktop, do not use the cooktop as a 
cutting board.

■

Use cookware about the same size as the surface cooking 
area. Cookware should not extend more than ½" (1.3 cm) 
outside the area.

■

Use flat-bottomed cookware for best heat conduction and 
energy efficiency. Cookware with rounded, warped, ribbed or 
dented bottoms could cause uneven heating and poor cooking 
results.

■

Determine flatness by placing the straight edge of a ruler 
across the bottom of the cookware. While you rotate the ruler, 
no space or light should be visible between it and the 
cookware.

■

Cookware designed with slightly indented bottoms or small 
expansion channels can be used.

■

Make sure the bottoms of pots and pans are clean and dry 
before using them. Residue and water can leave deposits when 
heated.

■

To avoid damage to the cooktop, do not cook foods directly on 
the cooktop.

The Cooktop On indicator light is located on the console panel. 
When any control knob on the console panel is turned on, the 
Cooktop On indicator light will glow.

On ceramic glass models, the hot surface indicator light is located 
on the console panel.
The hot surface indicator light will glow as long as any surface 
cooking area is too hot to touch, even after the surface cooking 
area is turned off.

The Triple-Choice™ Element offers flexibility depending on the size 
of the cookware. Single size can be used in the same way as a 
regular element. The dual and triple sizes combine single, dual and 
outer element and are recommended for larger size cookware, 
large quantities of food, and home canning.

REMEMBER: When range is in use, the entire cooktop area 
may become hot.

A

B

C

A

B

C