Electrolux E30MC75PPS 사용자 매뉴얼

•  Be sure the appliance is unplugged and all

parts are COOL before replacing oven light.

Wear a leather-faced glove for protection 

against possible broken glass or burns.

The oven light bulbs are located at the rear of the 

oven cavity and are covered with a glass shield. 

The glass shield must be in place whenever the 

oven is in use.

Replacing the lower oven interior light bulbs:
1.  Turn electrical power off at the main source or 

unplug the appliance.

2.  Remove lower oven interior light shield by 

turning a quarter turn counter-clockwise.

3.  Replace bulb with a new 

Halogen appliance bulb. 

Please note: do not allow your fingers to touch the

new bulb when replacing. This will shorten the life 

of the new bulb. Use a paper towel to cover the 

new bulb when installing.
4.  Replace glass shield over bulb by rotating 

clockwise.

5.  Turn power back on again at the main source 

(or plug the appliance back in).

6.  The clock will then need to be reset.

•  Be sure the appliance is unplugged and all

parts are COOL before replacing oven light.

Wear a leather-faced glove for protection 

against possible broken glass or burns.

An interior oven light will turn on automatically 

when the oven door is opened. The oven light may 

be turned on when the door is closed by using 

the oven light switch located on the control panel. 

The lamp is covered with a glass shield. The glass 

shield can be remove to be cleaned manually or to 

change the oven light.
To replace the oven interior light bulb:
1.  Turn electrical power off at the main source.
2.  Remove interior oven light shield by turning a 

quarter turn counter-clockwise.

3.  Replace bulb with a new T-4 type Halogen 25 

watt appliance bulb.

Please note: do not allow your fingers to touch the

new bulb when replacing. This will shorten the life 

of the new bulb. Use a paper towel to cover the 

new bulb when installing.
4.  Replace glass oven light shield by rotating 

clockwise.

5.  Turn power back on again at the main source 

(or plug the appliance back in).

6.  Be sure to reset the time of day on the clock.