Philips DVP6620/12 사용자 설명서
E
n
g
li
sh
15
Basic Connections
(continued)
Step 2: Placing the unit
Before you start....
– Make sure that all cables have been
connected to this unit.
– To prevent this unit from being
scratched, always covers its front surface
with a cloth before you place it flat on
any surface.
– Make sure that all cables have been
connected to this unit.
– To prevent this unit from being
scratched, always covers its front surface
with a cloth before you place it flat on
any surface.
Option 1: Placing on the table top
A
Place this unit on a flat surface with the
front panel facing down.
B
Place the detachable stand on the rear
panel.
C
Slide the stand to the left to lock it into
position.
Option 2: Mounting on the wall
CaUtION!
risk of personal injury and damage
to the unit. allow only qualified
persons to mount the unit.
Note:
Mounting accessories not supplied.
Mounting accessories not supplied.
A
Mark the wall for screw hole positions
where you intend to mount this unit,
then drill the screw holes.
then drill the screw holes.
B
Insert the rubber wall plugs and screws
into the holes.
C
Hook this unit firmly onto the screws
and lock into position.
Helpful Hint:
– To remove the stand, press and hold the
catch at the extreme right of the rear panel
and push the panel towards the right.
– To remove the stand, press and hold the
catch at the extreme right of the rear panel
and push the panel towards the right.
To lock stand, slide to left
A
A
C
IR
STANDBY/PLAY
B
B
C
Clean Cloth
1dvp6620_eu_eng.indd 15
2008-08-06 2:21:21 PM