Philips DCM2020/12 사용자 설명서
11
English
Connect FM aerial
Tip
•
For optimal reception, fully extend and adjust the
position of the antenna.
•
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL socket.
•
The unit does not support MW radio reception.
1
Connect the supplied FM antenna to the
FM AERIAL socket on the main unit.
Set clock
1
1
In standby mode, press PROG/CLOCK
SET for 3 seconds to activate clock setting
mode.
»
[CLOCK SET] scrolls on the display,
then the time format [24H] and [12H]
appears.
2
Press / to select 24H or 12H, then
press PROG/CLOCK SET to confirm.
»
The hour digits begin to blink.
3
Press / to set hour, then press
PROG/CLOCK SET again.
»
The minute digits begin to blink.
4
Press / to set minute.
5
Press
PROG/CLOCK SET to confirm the
clock setting.
FM
Note
•
If you are not going to use the remote control for a
long time, remove the batteries.
•
Do not use old and new or different types of batteries
in combination.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Demonstrate the unit’s
features
1
1
In the standby mode, press until
“DEMO ON” is displayed.
»
This system’s features are displayed
one by one.
• To turn off the demonstration, press
again.
a
b
c
EN