Philips MCI500H/05 사용자 설명서
33
Yes. The maximum distance of Wi-Fi
transmission is 250m measured in open
spaces. However, in a home environment,
where solid obstacles such as walls and
doors are present, the effective transmission
distance is reduced to 50-100m. Reposition
the devices if you experience transmission
problems.
How do I avoid Wi-Fi interferences from
other devices that operate in the same
(2.4GHz) frequency spectrum, such as Dect
phones or bluetooth devices?
Move Wireless Micro Hi-Fi System at
•
least 3m away from such devices.
Use a WEP/WPA encryption key when
•
you create the wireless connection your
PC / home network.
Change the operating channel on the
•
interfering devices.
Turn the devices in different directions to
•
minimize interference.
The wireless firmware update failed, what do
I do?
1
Ensure that the PC is connected to the
Internet.
2
Use an Ethernet cable (sold separately) to
connect Wireless Micro Hi-Fi System to
the PC.
3
On the PC, launch the WADM to update
the firmware.
I have done all the steps described to connect
Wireless Micro Hi-Fi System to my wireless
home network, but Wireless Micro Hi-Fi
System is still not connected.
On Wireless Micro Hi-Fi System,
•
press MENU. Select [Information] >
[Wireless] > [Wireless Mode] Check
that Wireless Micro Hi-Fi System has
been changed from Ad hoc mode to
Infrastructure mode. Also check that the
SSID, IP address, WEP key, or WPA key
matches the setup of your wireless home
network.
Try to change the SSID on your router
•
to a more unique name to ensure that
14 Troubleshooting
Caution
Never try to repair the system yourself as this
•
will invalidate the warranty.
Do not open the system as there is a risk of
•
electric shock.
If a fault occurs, first check the FAQ points,
•
then consult your dealer or Philips for help.
Wireless Micro Hi-Fi System is connected to
a home network and music skips during play
(from any source including HD), what do I do?
Ensure that the network router is turned
•
on.
Ensure that the network settings are
•
correct for the selected network (see
section ‘Connect to a home network’).
I cannot hear any sound or the sound is poor,
what do I do?
Press
•
+ VOL - to increase the volume.
Press the
•
MUTE button again to
reactivate the sound output.
Check that the RCA cable is connected
•
correctly.
Check that you have selected ‘Aux in’
•
as the source on the connected stereo
system.
Check if the volume control of the
•
connected stereo system is adjusted
correctly.
The radio reception is poor, what do I do?
Adjust the antenna for better reception.
•
Increase the distance between Wireless
•
Micro Hi-Fi System and TV or VCR
devices.
Is there a maximum distance of transmission
between a Philips Wireless Music / Micro
Center and Wireless Micro Hi-Fi System for
effective streaming?
English
EN