Philips MCM398D/05 사용자 설명서
English
15
Radio Reception
Tuning to preset radio stations
●
Press ALBUM/PRESET
4 / 3 until the
desired preset station is displayed.
RDS
Radio Data System
is a service that allows
FM stations to show additional information. If
you are receiving a RDS station,
you are receiving a RDS station,
and the
station name are displayed.
When automatic programming is used, RDS
stations will be programmed first.
When automatic programming is used, RDS
stations will be programmed first.
Scrolling through different RDS
information
information
●
Press CLOCK/RDS on the remote control
briefly and repeatedly to scroll through the
following information (if available):
– Station name
– Radio text messages
– Frequency
briefly and repeatedly to scroll through the
following information (if available):
– Station name
– Radio text messages
– Frequency
Setting the RDS clock
Some RDS radio station may be transmitting a
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
real clock time at an interval of every minute. It
is possible to set the clock by using a time signal
which is broadcast together with the RDS signal.
1
Tune to a RDS station (refer to “Tuning to radio
stations”).
stations”).
2
Press CLOCK/RDS for more than two
seconds.
seconds.
➜
"
SEAR TM" is displayed.
➜
When RDS time is read, "
RDS" and RDS time
value are displayed and the current time will be
stored.
stored.
Note:
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
– Some RDS radio station may be transmitting a
real time clock at a minute interval. The accuracy
of the transmitted time depends on the
transmitting RDS radio station.
pg 001-025_MCM398D_22-Eng
2007.5.9, 10:11
15