Philips MCM398D/05 사용자 설명서
18
English
Clock/Timer
Clock setting
There are two possible methods for setting the
clock: manually or automatically by using RDS.
clock: manually or automatically by using RDS.
Automatic clock setting
Refer to “Setting the RDS clock”.
Refer to “Setting the RDS clock”.
Manual clock setting
The clock can be set in either 12-hour or
24-hour mode ("
The clock can be set in either 12-hour or
24-hour mode ("
AM 12:00" or "00:00" for
example).
1
In standby mode, press and hold CLOCK/RDS
on the remote control.
on the remote control.
➜
SET CLOCK is displayed briefly. Then, the
clock digits for the hours flash.
2
Press Ç on the remote control to select clock
mode.
mode.
➜
"
12 TO 24 HOUR" or "24 TO 12 HOUR"
scrolls once. Then, the clock digits for the hours
continue to flash.
continue to flash.
3
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
remote control) to set the hours.
4
Press CLOCK/RDS again.
➜
The clock digits for the minutes flash.
5
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
remote control) to set the minutes.
6
Press CLOCK/RDS to confirm the time.
Timer setting
●
The system can be used as an alarm clock,
whereby the CD, FM or USB is switched on at a
set time (one time operation). The clock time
whereby the CD, FM or USB is switched on at a
set time (one time operation). The clock time
needs to be set first before the timer can be
used.
used.
●
During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically.
seconds, the system will exit timer setting mode
automatically.
1
In standby mode, press TIMER/SLEEP on the
remote control for more than two seconds.
remote control for more than two seconds.
2
Press SOURCE repeatedly to select the sound
source.
source.
➜
“
SET TIME” and “SELECT SOURCE” are
displayed.
3
Press TIMER/SLEEP to confirm your desired
mode.
mode.
➜
“
SET ON TIME” is displayed and the clock
digits for the hours flash.
4
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the hours.
remote control) to set the hours.
5
Press TIMER/SLEEP again.
➜
The clock digits for the minutes flash.
6
Adjust VOLUME -/+ (or press VOL +/- on the
remote control) to set the minutes.
remote control) to set the minutes.
7
Press TIMER/SLEEP to confirm the time.
➜
The timer is now set and activated.
Activating and deactivating timer
●
In standby or during playback, press TIMER/
SLEEP
SLEEP
once on the remote control.
➜
Display shows if activated, and disappears if
deactivated.
Sleep timer setting
The sleep timer enables the system to switch off
by itself after a set period of time.
by itself after a set period of time.
1
Press TIMER/SLEEP on the remote control
repeatedly to select a preset time.
repeatedly to select a preset time.
➜
The selections are as follows (time in
minutes):
60
60
60
60
60 ™ 45
45
45
45
45 ™ 30
30
30
30
30 ™ 15
15
15
15
15 ™ 0
00
00 ™ 60
60
60
60
60 …
➜
"
SLEEP XX" is displayed. "XX" is the time in
minutes.
➜
is displayed if the sleep time you have
selected is not 0.
2
When you reach the desired length of time, stop
pressing the TIMER/SLEEP button.
pressing the TIMER/SLEEP button.
To deactivate the sleep timer
●
Press TIMER/SLEEP repeatedly until "
0" is
displayed, or press Eco Power/STANDBY-IN
2.
2.
pg 001-025_MCM398D_22-Eng
2007.5.9, 10:11
18