Philips AJL305/05 사용자 설명서

This apparatus is fi tted with an approved 13 Amp plug.To change a fuse in 
this type of plug proceed as follows:

1. Remove fuse cover and fuse.

2.  Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved 

type.

3.  Refi t the fuse cover.

If the fi tted plug is not suitable for your socket outlets, it should be cut off 
and an appropriate plug fi tted in its place. If the mains plug contains a fuse, 
this should have a value of 3 Amp. If a plug without a fuse is used, the fuse at 
the distribution board should not be greater than 3 Amp.

Note: The severed plug must be disposed of to avoid a possible shock 
hazard should it be inserted into a 13 Amp socket elsewhere.

The wires in the mains lead are coloured with the following code: blue = 
neutral (N), brown = live (L). As these colours may not correspond with the 
colour markings identifying the terminals in your plug, proceed as follows:

• 

Connect the blue wire to the terminal marked N or coloured black.

• 

Connect the brown wire to the terminal marked L or coloured red.

• 

Do not connect either wire to the earth terminal in the plug, marked E 

(or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped 
over the sheath of the lead - not simply over the two wires.

Recording and playback of material may require consent. See Copyright Act 
1956 and The Performer’s Protection Acts 1958 to 1972.

AJL305_05_CCR.indd   3

AJL305_05_CCR.indd   3

2008-01-24   2:04:33 PM

2008-01-24   2:04:33 PM