X-Rite Elcometer 407 Statistical Glossmeter J407-1 데이터 시트
제품 코드
J407-1
Elcometer 407
Statistical Glossmeter
The Elcometer 407 Statistical Glossmeter measures
gloss at three angles of reflection; 20˚, 60˚, and 85˚
and uses the internal memory to store readings.
At a glance:
•
Triple angle measurment
•
Measure any surface from
gloss to matt
•
Statistical readings can be
stored internally
data sheet
www.elcometer.com
1 / 3
Elcometer 407 Statistical Glossmeter
V1: 18.05.07
Elcometer 407 Statistical Glossmeter
Can be used in accordance with:
AS 1580-602.2
ASTM C 584
ASTM D 523
ASTM D 1455
BS DIN EN ISO 2813
ISO 7668
JIS Z 8741
Appearance
Appearance measurement is
a way of putting numbers to
characteristics of surfaces
that we see. The ability to
independently quantify
appearance allows for
products to be similar
whenever and wherever the
product is manufactured or
coated.
Elcometer provide a
comprehensive range of hand
held instruments to measure
most of the individual
characteristics that generate
the overall appearance of a
material or coating.
Gloss
The ability of a surface to
reflect light without scattering
is known as Gloss. Gloss is
measured by directing a
constant power light beam at
an angle to the test surface
and then by monitoring the
amount of reflected light.
Different surfaces require
different reflective angles.
Elcometer Glossmeters cover
the range necessary to
measure almost any surface
from high gloss to matt, from
large to small surfaces - flat
or curved
Haze
Some materials appear to
have considerable difference
in gloss yet give comparable
readings when measured with
a glossmeter at one angle.
These materials can be
separated by measuring at a
second angle and comparing
the difference of the two
readings. Haze is defined by
ASTM D4039 as the
difference between gloss at
60° and the gloss at 20°
60° and the gloss at 20°
.
Elcometer 407 Statistical Glossmeter
The Elcometer 407 Statistical
Glossmeter measures gloss at three
angles of reflection; 20°, 60° and 85° and
uses the internal memory to store
readings.
Gloss is measured by directing a
constant power light beam at an angle to
the test surface and monitoring the
reflected light. Different surfaces require
different reflective angles.
Gloss measurement is necessary to
monitor the uniformity, compatibility, or
possibly the deterioration of any
protective gloss finish.
The Elcometer 407 Statistical
Glossmeter is supplied with Novo-Soft
™
software.
At a glance:
Triple angle measurement
Measure any surface from
gloss to matt
gloss to matt
Statistical readings can be
stored internally
stored internally
Triple Angle
Measure at 20°, 60° and 85°
angles.
Auto-ranging
Internal calculation of maximum,
minimum, mean standard deviation
& coefficient of variation.
Multi Language
Menus in English, French,
German, Italian, Spanish & Dutch.
Statistical Reading
Up to 200 readings can be stored
internally.
The gauge can be connected to
the Elcometer Novo-Soft
™
Software for further analysis and
archiving.