Bosch d9412gv3 사용자 설명서
D9412GV3/D7412GV3 | Program Entry Guide | 2.0 Panel and Area Wide Parameters
EN | 25
Bosch Security Systems, Inc. | 10/11 | F01U170807-02
When activating an on-board relay using
remote automation software, the
D9412GV3 and D7412GV3 Control
Panels log and print the resulting event
as:
remote automation software, the
D9412GV3 and D7412GV3 Control
Panels log and print the resulting event
as:
Relay 250 (Relay A)
Relay 251 (Relay B)
Relay 252 (Relay C)
Relay 251 (Relay B)
Relay 252 (Relay C)
Auto Function Reports
The following prompts support customized routing of
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.
Auto Function Reports. Selecting Yes enables a
report to be sent when the event occurs.
Table 15: Auto-Function Reports
Report Selections
Report
Description
R# Sked
Executed
Executed
Yes, No
Sked Executed
Event
Event
R# Sked
Changed
Changed
Yes, No
Sked Changed
Event
Event
R# Execute
Fail
Fail
Yes, No
Fail to Execute
Event
Event
RPS Reports
Selecting Yes enables sending a report when the
RPS Passcode Event occurs.
RPS Passcode Event occurs.
"RPS Access Fail" might indicate a
wrong RPS passcode when
communicating with the control panel,
or a valid RPS session was abnormally
terminated. "Remote Reset" indicates a
Reset command was issued from RPS.
"Fail to Call RPS" indicates that control
panel called RPS, but was unable to
connect.
wrong RPS passcode when
communicating with the control panel,
or a valid RPS session was abnormally
terminated. "Remote Reset" indicates a
Reset command was issued from RPS.
"Fail to Call RPS" indicates that control
panel called RPS, but was unable to
connect.
Table 16: RPS Reports
Report Selections
Report
Description
R# Log
Threshold
Threshold
Yes, No
Event log threshold
reached
reached
R# Log
Overflow
Overflow
Yes, No
Log is full, old events
are overwritten
are overwritten
R# Para
Changed
Changed
Yes, No
RPS Parameter
Change Event
Change Event
R# RPS OK
Yes, No
Successful RPS
Access Event
Access Event
R# RPS Fail Yes, No
Failed Access RPS
Event
Event
R# Remote
Reset
Reset
Yes, No
Remote Reset Event
R# Program
OK
OK
Yes, No
Successful Local
Programming Event
Programming Event
R# Program
Fail
Fail
Yes, No
Failed Local
Programming Event
Programming Event