National Instruments 800 Series 사용자 설명서

This manual contains instructions for installing and configuring the 
National Instruments VXIpc 800 Series embedded computer kit. The 
VXIpc 800 Series includes all the models of the VXIpc-800 embedded 
computers.

This manual is organized as follows:

•

Chapter 1, Introduction, describes the VXIpc 800 Series of 
embedded VXI computers, lists what you need to get started, 
describes the hardware, and lists optional equipment and software. 

•

Chapter 2, Functional Overview, contains functional descriptions 
of each major logic block on the VXIpc 800 Series embedded 
computers. 

•

Chapter 3, VXIpc 800 Series Configuration and Installation, 
contains the instructions to configure and install the VXIpc 800 
Series embedded computer. 

•

Chapter 4, BIOS, contains information on BIOS, the low-level 
interface between the hardware and PC software that configures 
and tests your hardware at boot up. 

•

Appendix A, Specifications, describes the environmental, 
electrical, and mechanical specifications of the VXIpc 800 Series 
embedded computer.

•

Appendix B, VXIpc 800 Series System Resources, describes what 
system resources are available on the VXIpc 800 Series and where 
they are allocated. 

•

Appendix C, LED Indicators, describes how to read the LEDs on 
the front panel to interpret the status of the VXIpc 800 Series. 

•

Appendix D, Front Panel and Connectors, describes the front 
panel and connectors on the VXIpc 800 Series.