Canon LBP-250 사용자 설명서

If you are using the LBP-810 as a local printer (connected directly to your 
computer) follow the steps below. If the LBP-810 is already on your 
network, and you want to start using it, follow the steps in “Connecting 
to the LBP-810 Already on Your Network” on pag e 58. If you want to 
install the LBP-810 as a network printer, follow the steps in “Connecting 
the LBP-810 as a Network Printer” on pag e 62.

For installation instructions using the CD-ROM menu, please see the 
Getting Started Guide.

Following is the installation procedure of plug and play for “Using USB 
and Parallel Port” under Windows 95/98/Me.

Before you install the software, make sure you do the following:

❏ Start Windows 95, 98 or Me.
❏ Connect the printer to your computer (For details, see the Getting 

Started Guide).

❏ Turn on the printer (For details, see the Getting Started Guide).

If you are using Windows 95 OSR2.1 or later, an error may occur while 
trying to install using plug and play. If you get an error, install the 
software using the CD-ROM. To check which version of Windows 95 you 
are using, open the system window in Control Panel and look at the 
version number in the General tab. 4.00.950 B or 4.00.950 C means you 
are using OSR2.1 or later.

In order to use the printer via USB, the following requirements need to be 
satisfied.

❏ Your computer must be equipped with a USB port and it is necessary 

that its operation is approved by the manufacturer.

❏ Windows 95 is not available for USB.