ATTO Technology 1500D/E 사용자 설명서
47
ATTO Technology Inc. iPBridge Installation and Operation Manual
2.4 Updating firmware
Several processors control the flow of data in the ATTO iPBridge. The firmware to control these
processors can easily be upgraded in the field using the
processors can easily be upgraded in the field using the
PUT
command from an FTP connection.
The iPBridge firmware is distributed as a
compressed .zip file and can be obtained from the
ATTO Technology, Inc. web site at
compressed .zip file and can be obtained from the
ATTO Technology, Inc. web site at
To use FTP over GbE to flash new firmware into
the iPBridge
the iPBridge
1
Uncompress the
.zip
file obtained from the
ATTO Technology Inc. website
(
) into an image file (
.ima
).
Note the filename.
2
Establish an FTP link to the bridge that is to be
flashed.
flashed.
3
Use the
PUT
command to download the
firmware. For example
c:\bridge_firmware\I1500110.ima
4
Once the download is complete, cycle power on
the iPBridge to activate the new firmware.
the iPBridge to activate the new firmware.