StarTech.com RACKCONS1908 사용자 설명서

Instruction Manual

17

Ready PC + N: In Scan mode, scan through power-on and eye mark selected computers.
Ready PC: In Scan mode, scan through power-on computers. The non-volatile memory 

stores the Scan Type setting.
Scan Rate
Sets the duration of a computer displayed in Auto Scan mode. The options are 3 

seconds, 8 seconds, 15 seconds and 30 seconds. Scan Rate settings are stored in non-

volatile memory.
Keyboard Speed
The Console offers keyboard typematic settings that override similar settings in the 

BIOS and in Windows. Available speed options are Low, Middle, Fast and Faster as 

10, 15, 20 and 30 characters/sec respectively. The non-volatile memory stores the 

Keyboard Speed setting.
Hotkey Menu
When you hit the left <CTRL> key twice within two seconds, the Hotkey Menu appears 

displaying a list of hot-key commands if the option is On. The Hotkey Menu can be 

turned Off if you prefer not to see it when the left <CTRL> key is hit twice. The non-

volatile memory stores the Hotkey Menu setting.
CH Display
Auto Off: After you select a computer, the port number and name of the computer will 

appear on the screen for 3 seconds then disappear automatically.  When set to Always 

On: The port number and name of a selected computer and/or OSD status are displayed 

on the screen all the time. The non-volatile memory stores the CH Display setting.
Position
The position of the selected computer name and/or OSD status displayed on screen 

during operation. The actual display position shifts due to different VGA resolution, the 

higher the resolution the higher the display position. The nonvolatile memory stores 

the Position setting. UL as Upper Left, UR as Upper Right, LL as Lower Left, LR as Lower 

Right. MI as Middle.