Polycom 1800 사용자 설명서
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc.
841
Enabling and Configuring 802.1X Authentication
802.1X Authentication for each NIC is enabled or disabled in the Setup > Ethernet Settings dialog box.
The following additional table columns are used to modify these parameters:
The following additional table columns are used to modify these parameters:
● 802.1X Authentication
● User Name
● Password
● User Name
● Password
Modify the Ethernet Settings table fields as set out below:
802.1X Authentication - Configuration
Field
Description
802.1x Authentication
For each NIC, click the arrow to open the drop-down menu and select (or
disable) the 802.1X Authentication method:
•
disable) the 802.1X Authentication method:
•
Off
•
EAP-MD5
•
EAP-TLS
•
PEAPv0
•
MSCHAPv2
User Name
Enter the User name that the RMX will use to register with the 802.1X
Authentication Server. This must be the RMX’s DNS name and can be up to
256 characters.
Note: If the Domain Name (DC) field was completed in the Certificate Request,
the User must be:
<Common Name (DNS)>@<Domain Name (DC)> as set out in the Certificate
Request.
Authentication Server. This must be the RMX’s DNS name and can be up to
256 characters.
Note: If the Domain Name (DC) field was completed in the Certificate Request,
the User must be:
<Common Name (DNS)>@<Domain Name (DC)> as set out in the Certificate
Request.
Password
(EAP-MD5, PEAPv0 and
MSCHAPv2 only)
(EAP-MD5, PEAPv0 and
MSCHAPv2 only)
Enter the Password, that the RMX will use to register with the 802.1X
Authentication Server. Up to 256 Unicode characters can be used.
The Password is always displayed as four asterisks.
Authentication Server. Up to 256 Unicode characters can be used.
The Password is always displayed as four asterisks.