JVC LVT1833-010B 사용자 설명서

To view an image on the TV screen, select the 
video signal type correctly according to the TV 
after connecting the main unit to the TV.

■ IMPORTANT
• Slide the remote control mode 

selector to [SHIFT].

• Refer to “Turning on/off the main unit” on 

page 13. 

Press [DVD 3] or [USB 3].

• When a disc is loaded or a USB device is 

connected, press 

7

 to stop playback.

• The current video signal type appears. 
Example: When “PAL. 576I” is selected as 

Press 2 or 3 (cursor) to select the 
video signal type suitable for the 
TV. 

• When the TV is connected to the [VIDEO] 

terminal or the [COMPONENT] terminals, 
the video signal type can be selected as 
instructed below.
- Select “PAL. 576I” for a TV only compatible 

with a PAL interlaced video signal. 

- Select “PAL. 576P” for a TV equipped with 

a component terminal and compatible with 
a PAL progressive video signal. 

- Select “NT. 480I” for a TV only compatible 

with an NTSC interlaced video signal.

- Select “NT. 480P” for a TV equipped with a 

component terminal and compatible with 
an NTSC progressive video signal.

• When the TV is connected to the [HDMI MON-

ITOR OUT] terminal, the video signal type can 
be selected as instructed below.
- Select “AUTO” for normal usage. (the ini-

tial setting) 

- Select “PAL. 576P”, “PAL. 720P”, 

“PAL.1080I”, “PAL.1080P”, “NT. 480P”, 
“NT. 720P”, “NT.1080I” or “NT.1080P” as 
needed. (The selectable settings differ 
according to the resolution of the con-
nected TV.)

• You can also select the video signal type by 

repeatedly pressing [SCAN MODE].

Remote control 
mode selector

2

/3 (cursor)/

ENTER

Preparation (continued)

Do not connect the power cable until all other connections have been made.

NX-F3_NX-F7[US].book  Page 11  Tuesday, March 4, 2008  2:43 PM