Sony VGP-XL1B 매뉴얼
VGP-XL1B User Guide
23
Loading & Unloading Discs
Loading the VGP-XL1B Changer/Recorder
Before you load discs into the VGP-XL1B Changer/Recorder for
the first time, please do the following:
the first time, please do the following:
1 Make sure the Changer/Recorder is properly connected to the host
computer and is turned on.
2 Make sure the system is connected to the Internet and the Internet
connection is working properly.
3 Start Media Center Setup and verify that the correct options were
selected during setup. From the main menu, select
Tasks
Settings | General | Windows Media Center Setup | Run Setup
Again
Again
.
4 Select
Yes
when asked, “Do you want Media Center to
automatically connect to the Internet to get this information?”
5 Select
Yes
when asked, “Do you have an always on Internet
connection?”, if this is so.
Once you have completed this procedure, continue with loading
discs into the Changer/Recorder.
discs into the Changer/Recorder.
To load a single disc
•
Press the
Load
button once and insert the disc in the open slot
of the optical drive located on the front panel.
To load multiple discs
•
Press the
Load
button twice and insert each disc in the open
slot of the optical drive one at a time. The Changer/Recorder
carousal keeps rotating open slots to the drive until all slots are
filled or until no disc is inserted after 15 seconds.
carousal keeps rotating open slots to the drive until all slots are
filled or until no disc is inserted after 15 seconds.
Note
: When loading discs, make sure that the label is facing to the
right of the slot.