Heat Controller B-MMC09FA-1 사용자 설명서
- 10 -
Wall Mounted Multi-Zone Split System Air Conditioner
Seaside applications and installation
Seaside applications and installation
1. Air conditioners should not be installed in areas where corrosive gases, such as acid or alkaline gas, are produced.
2. Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result corrosion
2. Do not install the product where it could be exposed to sea wind (salty wind) directly. It can result corrosion
on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunc-
tion or inefficient performance.
tion or inefficient performance.
3. If outdoor unit is installed close to the seaside, it should avoid direct exposure to the sea wind.
Selecting the location(Outdoor Unit)
1) If the outdoor unit is to be installed close to the seaside, direct exposure to the sea wind should be avoided.
Install the outdoor unit on the opposite side of the sea wind direction.
2) To install the outdoor unit on the seaside, set up a windbreaker/barrier to keep the unit from being exposed to
the sea wind.
the sea wind.
3) Select a well-drained place.
• It should be strong enough (like concrete) to
obstruct the wind from the sea.
obstruct the wind from the sea.
• The height and width should be more than 150% of
the outdoor unit.
• A minimum of 70cm (27.6inches) of space between
outdoor unit and the windbreaker/barrier for easy
air flow.
outdoor unit and the windbreaker/barrier for easy
air flow.
Sea wind
Sea wind
Sea wind
Windbreaker/Barrier
1. Periodic ( more than once/year ) cleaning of dust or salt particles stuck on the heat exchanger using water is recommended.