Panasonic PV-GS9 사용자 가이드

Others

GAINUP:

Gain up Mode (p. 26)

 (White):

DPOF Setting completed (set to 1 or 

more picture) (p. 41)

640

:

[640 x 480] Image size

• For images not recorded with this Camcorder, the 

size display is determined as follows according to 
the number of horizontal pixels.

640

:

640 or more, less than 800 (The size 

is not displayed at under 640 pixels.)

SVGA

:

800 or more, less than 1 024

XGA

:

1 024 or more, less than 1 280

SXGA

:

1 280 or more, less than 1 600

UXGA

:

1 600 or more, less than 2048

QXGA

:

2 048 or more

PICTURE

 (Cyan): Photoshot Mode

PICTURE

 (Red):

While Photoshot recording is 

activated

PICTURE

 (Green): While the Card being read

PICTURE

 (Red):

No Card (Still Picture Mode)

By changing [C.DISPLAY] on the [DISPLAY] 
Sub-Menu, you can change the Counter Display Mode 
to Tape Counter Indication [COUNTER] (0:00.00), 
Memory Counter Indication [MEMORY] (M0:00.00), 
and Time Code Indication [TIMECODE] (0h00m00s00f). 
(p. 21) By repeatedly pressing the [DISPLAY] Button 
on the Remote Control, you can change the Counter 
Display Mode.

To display Date/Time Indication, set the appropriate 
Date/Time in [DATE/TIME] on the [DISPLAY] 
Sub-Menu. (p. 21)
You can also press the [DATE/TIME] Button of the 
Remote Control repeatedly to display or change the 
Date/Time Indication.

By changing [DISPLAY] on the [DISPLAY] Sub-Menu, 
you can change the Display Mode to All Function 
Display [ALL] and Minimum Display [OFF]. (p. 21)

You cannot use the Progressive Photoshot Function in 
the following cases.

• Digital Effect Modes in [EFFECT1]
• Digital Zoom [D.ZOOM]
• 1/750 s or faster shutter speed
• When brightness is insuffi cient
• When the MagicPix Function is ON
• When the Portrait is used

• When brightness is insuffi cient
• When the MagicPix Function is ON

You can change the Menu settings back to the 
shipping condition.

•  The initializing takes a little while.
•  After the initializing is completed, the [COMPLETED] 

Indication appears with beeps.

• Initializing will not erase a clock setting (p. 23) that 

has been adjusted.

If any one of the following indications lights up or 
fl ashes, please check the condition of the Camcorder.

 DEW (DEW DETECTED/EJECT TAPE):

Condensation has occurred. (pp. 66-67)

 (CHECK REC TAB):

The accidental erasure prevention slider on the 

inserted Cassette is open (that is, set to [SAVE]).

You are attempting Audio dubbing or Digital 

dubbing on a Tape while setting the accidental 

erasure prevention slider to [SAVE].

 (TAPE NOT INSERTED):

No Cassette in inserted. (p. 17)

 (LOW BATTERY):

The Battery is low. Recharge it. (p. 15)

:

The built-in battery is low. (p. 23)

 (NEED HEAD CLEANING):

The video heads are dirty. (p. 67)

 END (TAPE END):

The tape came to an end during recording.

REMOTE (CHECK REMOTE MODE):

Wrong Remote Control Mode has been selected.

(p. 15)

UNPLAYABLE TAPE

(OTHER FORMAT):

You are attempting to play back a tape section 

that has been recorded with a different TV system.

UNABLE TO A.DUB

(LP RECORDED):

Because the original recording was done in LP 

Mode, audio dubbing cannot be performed.

INCOMPATIBLE TAPE:

This cassette is incompatible.

PUSH THE RESET SWITCH:

Irregular mechanism is detected. Press the 

[RESET] Button (p. 70). This may solve the 

problem.

CARD FULL:

Card does not have suffi cient memory remaining.

Select Picture Playback Mode and delete 

unnecessary fi les.