Panasonic SDR-H90 사용자 설명서
20
LSQT1467 (ENG)
Preparation
Setup
3
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
Select [YES] and press the joystick. Perform steps 2 and 3 below to set the date and time.
¬Rotate the mode dial to select
or
.
1
Select the menu. (l 19)
2
Select the date or time, then
adjust the desired value with the
joystick.
adjust the desired value with the
joystick.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ The 24-hour system is used to display the time.
≥ [
≥ [
] appears on the right top of the screen
when [SET WORLD TIME] is set to [HOME],
while [
while [
] appears when it is set to
[DESTINATION].
3
Press the joystick to enter the
selection.
selection.
≥ The clock function starts at [00] seconds when
the joystick is pressed.
4
Press the MENU button to finish
the setting.
the setting.
≥ Check the date and time displayed.
∫ Changing the date and time display mode
Select the menu. (l 19)
Select the menu. (l 19)
[SETUP]
# [DATE/TIME] # desired display
style
∫ Changing the date format
Select the menu. (l 19)
[SETUP]
Select the menu. (l 19)
[SETUP]
# [DATE FORMAT] # desired
display style
≥ To set summer time, select the summer time in
[HOME] for [SET WORLD TIME] after setting
the clock.
the clock.
≥ The date and time function is driven by a built-
in lithium battery.
≥ If the time display is [- -], the built-in lithium
battery needs to be charged. Use the following
steps to charge the battery, and then set the
date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or insert the battery to
the unit, and the built-in lithium battery will be
recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the mode
dial is set to OFF, the battery is still being
recharged.)
steps to charge the battery, and then set the
date and time.
To recharge the built-in lithium battery
Connect the AC adaptor or insert the battery to
the unit, and the built-in lithium battery will be
recharged. Leave the unit as it is for approx.
24 hours and the battery will save the date and
time for approx. 6 months. (Even if the mode
dial is set to OFF, the battery is still being
recharged.)
[BASIC]
# [CLOCK SET] # [YES]
[DATE]
[D/T]
[OFF]
15.11.2009
15.11.2009 12:34
Display style
Screen display
[Y/M/D]
2009.11.15
[M/D/Y]
11.15.2009
[D/M/Y]
15.11.2009
SDR-H90&80EP-LSQT1467_mst.book 20 ページ 2008年12月2日 火曜日 午後2時32分